For fully automatic CNC bending machine operation, each step is not negligible. Various operations before startup:
Before starting the machine, the operator should check all aspects of the oil, mold, etc., this includes each component centralized oil supply place whether there is enough oil. In addition, whether the cleaning of the grinding tools is in place, do not think that the appearance of impurities will not have any impact. In fact, if these are not handled in time, it is easy to cause damage to the grinding tools.
All operations in the operation process:
From the start of the power supply, the operator will start to pay attention to the steps and switches. If abnormal conditions are found, automatic CNC bending will have automatic alarm Settings, at this time to stop all operation, first to exclude any possible damage to the machine tool behavior. In addition to the procedure, we should pay attention to check according to the drawings, sometimes a link error may lead to serial errors.
How to deal with the bending phenomenon of automatic CNC bending machine?
If the automatic CNC bending machine is found to have any bending behavior, we must stop the machine in time to check, especially to check the position and clearance of the upper and lower die, because it involves the problem of abrasive damage, of course, in the process of adjustment, can accelerate the operation, a part a part to find the damaged place. Of course, the bending place also needs the design of the notch, which includes the selection of more than eight times the width of the notch, according to the bending between must make up, generally bending about 4 mm plate actually needs about 32 notch to make up.
Automatic CNC bending machine foot switch will also appear bending, of course, this time the operator is the first to loosen the foot, and then continue to go down. Because this machine is different from the previous plate shearing machine, the operation will not involve the situation of grooving and welding rod.
