CNC bending machine mold has been widely used, so the demand is also very large. From the manufacturing process of mold, CNC bending machine mold should be used in forming mold, hot working mold, cold working mold, plastic mold and other links. On the other hand, from its development process, from the end of the 19th century to the middle of the 20th century, CNC bending machine mold material to high-speed steel; In the 1970s, polycrystalline diamond was synthesized by high pressure synthesis technology, which extended the application scope of diamond CNC bending machine mould to aviation, aerospace, automobile, electronics, stone and other fields. Therefore, combining these two aspects, CNC bending machine mould is very important for various industries.
Aerospace industry is the most traditional and the most important CNC bending machine mold application field. In this industry, CNC bending machine molds are commonly used to cut aircraft structural parts. These structural parts are generally large in volume, and in the past a lot of aluminum alloy was used. With the expansion of the application of titanium alloy and composite materials, the requirements of CNC bending machine die processing are becoming higher and higher.
Titanium alloys are notoriously difficult to process. The composite materials that only need to be laid and wound do not seem to need a lot of processing, but the processing quality requirements are getting higher and higher. For the CNC bending machine mold industry, this is not a small challenge. In addition to the structural parts of the fuselage, the machining of the aircraft engine is also a difficulty. The engine is generally made of difficult materials, complex shape, need groove drilling, blade processing and other procedures, the actual cutting effect of CNC bending machine mold requirements are very high. In addition, in order to meet the high quality requirements of aircraft structural parts, generally choose the whole blank to process, more than 90% of the material will be removed, due to the large processing volume, so the processing efficiency is very high.
